Sandarra Electrics Pty Ltd has been fined $120,000 for exposing workers to risk of serious injury on a residential construction site in Geelong, according to WorkSafe Victoria.
The company was convicted in the Geelong Magistrates’ Court of failing to eliminate or reduce the risk of a fall from height, as well as failing to prepare a Safe Work Method Statement for high-risk construction work.
The two charges arose after Sandarra was contracted to install solar panels and electrical wiring on the pitched roof of a two-storey house at Belmont in November 2017.
WorkSafe inspectors attending the property observed the company’s director standing on the first floor veranda roof without a harness.
The court heard he was in charge of two other workers on the site: a first-year apprentice and a man performing work experience.
The apprentice was on the second-storey roof wearing a harness; however, it was not attached to any fall protection ropes and was being worn incorrectly, with the straps over his shoulders and arms instead of his legs.
The court was told the height from the ground to the top of the veranda was 2.5 metres, while the second-storey roof was approximately 5.5 metres.
Sandarra had not prepared a Safe Work Method Statement as required where there is a risk of a person falling more than two metres.
There was also no fall protection in place for an extension ladder being used to gain access to the roof and no evidence that a bracket attached to the ladder could stop it from falling, should it slip.
Sandarra later complied with an Improvement Notice by having all of its employees complete a working at height safety course, before the company was placed into liquidation in May 2019.
WorkSafe Executive Director of Health and Safety Julie Nielsen said failure to take a safety-first approach when installing solar could have deadly consequences.
“The combination of height and electricity calls for employers to be doubly cautious when it comes to the safety of workers installing solar systems.
“There is no excuse for failing to protect workers from the risks of falls from height or electrocution; they are well known and WorkSafe will not hesitate to prosecute employers who do not control them, even if no incident has occurred,” she said.
To prevent falls from height employers can:
- Eliminate the risk by doing all or some of the work on the ground or from a solid construction.
- Use a passive fall prevention device such as scaffolds, perimeter screens, guardrails, safety mesh or elevating work platforms.
- Use a positioning system, such as a travel-restraint system.
- Use a fall arrest system, such as a catch platform or safety nets.
- Use a fixed or portable ladder or implement administrative controls.
Published at Thu, 17 Oct 2019 13:00:00 +0000